What may you do to your aircraft without A&P involvement? More than you might think.
The FAA defines who may perform maintenance on certificated aircraft in FAR 43.3. This rule lists all the usual certificated suspects: mechanics, repair stations, air carriers, repairmen employed by a repair station or air carrier, and (under certain conditions) aircraft, engine, propeller and appliance manufacturers. The rule also permits maintenance to be done by ordinary non-certificated folks provided it’s done under the supervision of and approved by a certificated mechanic.
Beyond that, FAR 43.3 permits a pilot to perform preventive maintenance on an aircraft owned or operated by that pilot, provided the aircraft is used strictly for non-commercial operations under Part 91. Pilots may do this all by themselves without any A&P involvement.
How cool is that?
What exactly is this preventive maintenance stuff that pilots are permitted to do on their own recognizance? Ah, there lies the rub! The phrase “preventive maintenance” is defined in FAR 1.1 (Definitions) as follows: “Preventive maintenance means simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operations.”
That’s about as clear as mud. What exactly are preservation operations? Which ones are considered simple or minor? What assembly operations are considered complex? The definition doesn’t say.
Appendix A
In an attempt to help clear up this mystery, the FAA published Appendix A to Part 43 of the FARs. Appendix A consists of three lengthy lists: (a) things the FAA considers to be major alterations; (b) things the FAA considers to be major repairs; and (c) things the FAA considers to be preventive maintenance tasks.
The first two lists in Appendix A—major alterations and major repairs—are clearly exemplary rather than exhaustive. It’s obviously impossible for the FAA rulemaking lawyers to anticipate every sort of alteration or repair someone might want to perform on an aircraft. So, it’s always been well understood that these Appendix A lists are simply examples of the kinds of alterations and repairs that the FAA deems to be major ones, and which therefore must be done using FAA-approved data and must be inspected and approved by an IA before the aircraft can be returned to service.
This third list—preventive maintenance tasks—seems different. It starts out like this…
(c) Preventive maintenance. Preventive maintenance is limited to the following work, provided it does not involve complex assembly operations:
…followed by a list of 31 specific enumerated tasks that the FAA considers to be preventive maintenance that a pilot may perform without A&P supervision.
The list includes such things as changing tires; servicing shock struts; greasing wheel bearings; lubricating just about anything (including engine oil changes); servicing hydraulic fluid; repairing upholstery and cabin furnishings; replacing seats and safety belts; replacing side windows (but not windshields); making simple repairs to fabric, skin, cowlings or fairings; replacing landing light and position light bulbs; troubleshooting and repairing landing light wiring; replacing or cleaning, gapping, and rotating spark plugs; replacing prefabricated fuel lines and any non-hydraulic hose connections; cleaning or replacing fuel and oil strainers and filters; replacing and servicing batteries; and removing and replacing tray-mounted avionics (except for autopilots, transponders, and DMEs).
It’s a pretty generous list. But, it’s not obvious what the FAA was thinking when it came up with the list.
There are some things on the list that don’t seem to be “simple or minor preservation operations” by any stretch of the imagination. Replacing side windows on a Beech or Cessna or Piper airplane is an awful job involving two-part catalytic sealant (Pro-Seal) that sometimes requires the use of low-grade tactical nuclear weapons to remove—even A&Ps hate this job (don’t ask me how I know this). Servicing main landing gear shock struts involves releasing and then inserting high-pressure nitrogen—you can get seriously hurt if you don’t know exactly what you’re doing. The same caution applies to replacing tires.
Other things on the list are just plain head-scratchers. Why does the FAA say it’s okay for a pilot to replace landing and nav light bulbs, but not post light or courtesy light bulbs? Why can a pilot troubleshoot and repair landing light wiring but not any other wiring? Why is it okay for a pilot to remove and reinstall a GNS 530W navigator or a G1000 primary flight display but not a KT-76A transponder or KN-64 DME? All things that make me go hmmmm…
But, the list in Appendix A is introduced by the words “[p]reventive maintenance is limited to the following work…” suggesting that the list is exhaustive, not exemplary. Advisory Circular 43-12A (“Preventive Maintenance”) reinforces this notion when it says:
FAR Part 43, Appendix A, paragraph (c) contains the list of those functions determined by the FAA to meet this definition. If a function does not appear in this list, it is not preventive maintenance.
That would seem to settle the matter, head-scratchers be damned. The FAA says that it isn’t on the list, you can’t do it without getting an A&P to supervise you and sign off your work in the aircraft maintenance records.
Or does it?
The Coleal Interpretation
In February 2009, the FAA’s Office of Chief Counsel, Rulemaking Division (AGC-200) issued a letter in response to a request for legal interpretation by David Coleal, Vice President and General Manager of Bombardier Learjet. The question Mr. Coleal posed to the FAA rulemaking lawyers was: “Is it legal for the pilot of a transport-category Learjet 60 to check the tire pressure?” The answer to that simple question by FAA Headquarters was a game-changer for our understanding of what the FAA does or does not consider to be preventive maintenance.
Now, the Learjet 60 has unusually high-pressure tires (up to 219 psi) and is subject to an Airworthiness Limitation requiring that the tire pressure be checked daily. Consequently, checking tire pressure requires a special gauge and special procedures, and is arguably a bit risky. The question was: Is this something the pilot may do, or does it require an A&P? Also, is the answer to this question different for a Learjet 60 being operated under Part 135 and one being operated under Part 91?
Surprisingly, the FAA’s official answer to Mr. Coleal was that checking the tire pressure on a Learjet 60 is a preventive maintenance task, even though it is not on the list set forth in Part 43 Appendix A. Consequently, the FAA ruled that a pilot may legally perform the daily tire pressure check provided the Learjet 60 is being operated under Part 91. If the airplane is operating under Part 135, however, then pilot-performed preventive maintenance (including the daily tire pressure check) is not allowed (per FAR 43.3), and an A&P must do it.
Ah, but how did the FAA lawyers determine that the tire pressure check was a preventive maintenance task even though it is not on the list? That’s where this story gets interesting. The Coleal letter states, in pertinent part:
Even though the introductory text of [Appendix A] subparagraph (c) states that “[p]reventive maintenance is limited to the following work…” (emphasis added), in view of the broader definition of preventive maintenance in section 1.1, we believe that such limitation is not controlling. Similarly, for the same reason, we also believe that the following sentence in Advisory Circular 43-12A … is overly restrictive. That sentence … states: “If a task or maintenance function does not appear in the list, it is not preventive maintenance.” As with the other paragraphs of Appendix A (i.e., on major repairs and major alterations), the lists are better viewed as examples of the tasks in each category—they cannot be considered all-inclusive. There are, no doubt, many “simple or minor preservation operations [tasks]” and many “replacement[s] of small standard parts not involving complex assembly operations” performed daily, especially on small general aviation aircraft, that the agency would consider to be preventive maintenance, though they are not included in the … listed items.
So, the official answer from 800 Independence—one that set a legal precedent that been in effect for the past ten years—is that the preventive maintenance a Part 91 pilot is permitted to do on his own recognizance is NOT limited to the 31 items on “the list” but can include all sorts of other things of comparable ease and non-complexity as the 31 listed exemplary tasks.
That means that if you want to change a burned out post light lamp, just go ahead and do it, never mind that it’s not on the list. Since changing a post light lamp is no more difficult, complex or risky than changing a landing light or nav light (both of which tasks are on the list), what possible reason could the FAA have for NOT considering it to be preventive maintenance?
Similar logic would apply to repairing faulty nav light or strobe light wiring, which is not on the list even through repairing landing light wiring is on the list. How could one of these reasonably be considered preventive maintenance and the others not be?
You get the idea. Given what the FAA said in the Coleal letter, if you do something not on the list that’s similar to something that is on the list and no more difficult, complex or risky, you’re on pretty firm legal ground should your action ever be challenged. Contrary to conventional wisdom—which might have been valid prior to 2009 but no longer is—you’re NOT limited to the 31 items on the list.
You bought a plane to fly it, not stress over maintenance.
At Savvy Aviation, we believe you shouldn’t have to navigate the complexities of aircraft maintenance alone. And you definitely shouldn’t be surprised when your shop’s invoice arrives.
Savvy Aviation isn’t a maintenance shop – we empower you with the knowledge and expert consultation you need to be in control of your own maintenance events – so your shop takes directives (not gives them). Whatever your maintenance needs, Savvy has a perfect plan for you: